Everything your plywood business needs, in one place

TCT (Tungsten Carbide Tipped) saw blades for cutting solid wood and plywood, with carbide tips brazed onto the blade body for a harder, longer-lasting edge than plain steel blades. Used across wood working, plywood, laminate, panel board, and furniture manufacturing wherever a straight, splinter-free cut matters. Tooth count is matched to the cut you need: lower tooth counts (48–60T) cut faster through solid wood and thicker panel stock, while higher tooth counts (96–120T) leave a finer edge suited to laminate and finished panel work. Available across five diameter/tooth combinations, from 175mm/60T up to 450mm/120T. Supplied under Ply Haat's ISO 9001:2015 quality system. Request a bulk quote with your required diameter and tooth count.

5 variants available

Finger joint cutters are used to join small offcuts of solid wood into longer, usable wooden blocks — a standard way to reduce timber wastage on a cutting line. They're designed for use on a Finger Joint Machine and sold as a set of 12 pieces. Used across wood-working operations that process solid wood into longer, structurally sound blocks for further manufacturing. Available in 125mm diameter, 4 teeth, with a 31.75mm or 40mm bore. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

Ply Haat's CCB (Chromated Copper Boron) dipping chemical is a wood preservative used in the treatment stage of plywood, block board, and flush door manufacturing. It's suitable for use with any face veneer, including Gurjan, Okoume, Holang, and Makai. Quality is controlled to ISI standards, and the treatment is formulated to give a better finish to the final panel — an important detail for manufacturers whose product is judged on surface quality as much as strength. Available in 30 kg packaging. Supplied under Ply Haat's ISO 9001:2015 and ISO 14001:2015 certified quality system — request a bulk quote for current pricing and lead times.

1 variant available

Dry veneer stitching tape used to join veneer sheets edge-to-edge before pressing, keeping adjacent sheets flat and aligned so the panel doesn't shift under the hot press. The perforated finish helps the tape sit flush and release cleanly once the panel is pressed. On high-volume lines, this tape is often used alongside Ply Haat's corrugated fasteners for extra hold when joining large numbers of veneer sheets per shift. Available in 12mm width, dry and perforated. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

Sanding belts built for drum sanders, used on plywood and panel finishing lines to smooth panel surfaces before dispatch or further finishing. A standard part of most panel finishing setups where consistent surface quality is needed across large volumes. Available in standard drum width, 60 grit. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing and packaging.

1 variant available

Water-based roller ink used for printing on plywood and panel products — grading marks, branding, or batch information applied directly on the panel surface. It's formulated to be waterproof and long-lasting once dry, so print stays legible through storage and handling. Available in Black, Red, Blue, and Green, each in 1 L packaging. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

4 variants available

Rubber safety gloves for handling chemicals and general plant work — standard protective equipment on any line where workers handle wood preservative chemicals, dipping solutions, or general factory materials. Available in free size, rubber material. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote for current pricing.

1 variant available

Carbide-tooth saw blades built for economical, precise cutting in laminate and panel board work, where a clean edge matters for the finished product. Used across the laminate industry and panel board industry. Tooth configuration is matched to the cut: higher tooth counts give a finer, cleaner edge on laminate sheet, while lower tooth counts cut faster through thicker panel stock. Available in three variants — 300mm/96T, 120mm/12+12T, and 110mm/30T. Supplied under Ply Haat's ISO 9001:2015 quality system — request a bulk quote with your required size.

3 variants available